Share this product

Toon-Brite Protective Clear Coat For Boats P1000

This product ad may change over time

Share

Toon-Brite Protective Clear Coat For Boats P1000

Users say:

This product works great and is easy to use, however it is thin and may run after a few coats. It is a good quality single stage clear coat that may not be suitable for all applications. It may also chip after a few coats.

Toon-Brite Protective Clear Coat for BoatsThis Toon-Brite Protective Clear Coat for Boats rejuvenates fading or oxidizing metal surfaces and provides a long-lasting barrier against the elements. It is a perfect clear coat option for aluminum, fiberglass, brass, copper, stainless, and other metal surfaces. This protective clear coat is designed from a corros…

New content will be added above the current area of focus upon selection

Toon-Brite Protective Clear Coat for BoatsThis Toon-Brite Protective Clear Coat for Boats rejuvenates fading or oxidizing metal surfaces and provides a long-lasting barrier against the elements. It is a perfect clear coat option for aluminum, fiberglass, brass, copper, stainless, and other metal surfaces. This protective clear coat is designed from a corrosion-resistant non-conductive formula and will make future boat cleaning considerably easier. It will provide years of protection against oxidation, UV rays, weathering, stains, salt spray, and electrolysis. Easily apply a clear-coat with either a 3-4 inch foam brush or spray it using an HVLP type sprayer. Be sure to clean and dry the vessel surface prior to application.Features: Makes Future Cleaning Much Easier; Works On Aluminum, Fiberglass, Brass, Copper, Stainless and Most Metal Surfaces; Protects For Years Against Oxidations, UV Rays, Weathering, Stains, Salt Spray and Electrolysis; Restores and Rejuvenates Faded Or Oxidized Surfaces; Will Not Chip Or Peel; Corrosion Resistant; Great Color Restorer; Reduces Maintenance For Both Metal and Fiberglass; Non-Conductive; Sizes Available: Gallon Coverage: 800-1200 Sq Ft.; 12 oz. Spray Coverage: 120 Sq Ft; **Clear-coat is not an anti-fouling paint. How to Apply Toon-Brite Protective Clear CoatToon-Brite Protective Clear Coat can be applied to aluminum, fiberglass, stainless steel, brass, copper, and galvanized steel. All surfaces must be clean, dry, and free of all contaminants (especially waxes, grease, & oils) prior to application.Coverage: One quart will cover approx. 200-300 sq. ft.Surface Preparation Metal; Thoroughly clean surface with an acid wash.; Once the surface has been properly cleaned, test the surface for adhesion by applying Clear-Coat to a small area and observe for 5 minutes.; If the coating stays flat and flows out, the surface is adequately clean.; If beading occurs, re-clean.; Once surface is properly cleaned, apply 2 coats (or more) of Toon-Brite Clear Coat.; Fiberglass; Thoroughly clean the surface of oxidation, wax, and polish.; For heavy build up, use Toon-Brite Fiberglass Cleaner.; Apply Toon-Brite Clear Coat. Multiple coats may be necessary.; Follow up with fiberglass polish then wax.; Application Information Provide adequate ventilation when applying Clear Coat and remove all sources of ignition or spark.; To apply by hand, use a 3" or 4" foam applicator.; To apply by spray, Toon-Brite recommends using a HVLP paint gun. If needed, dilute with acetone.; Apply to the surface in long even strokes being careful not to let runs or sags develop.; Make sure to overlap each pass.; The surface temperature should be above 50F. Do not apply when humidity is above 85%.; For applications requiring multiple coats, the preceding coat should be dry to the touch.; Allow at least 8 - 24 hours to cure.; Clean up can be done with soap and water for hands. Use acetone or lacquer thinner for Clear-Coat clean up.Toon-brite Protective Clear-Coat FAQ'sQ: What type of surface will Clear-Coat work on? A: Clear-coat can be applied to Aluminum, Fiberglass, Copper, Brass, Stainless Steel, or any other surface you want to prevent from staining and discoloring.; Q: Can you see Clear-Coat once it's applied? A: Clear-coat is virtually invisible on all surfaces other than a high polished surface. On a high polish finish, Clear-coat when wiped can sometimes leave slight sheen. This will some what lessen with a second coat and it also tends to diminish with time.; Q: Will Clear-Coat work on painted surfaces? A: Yes, Clear-coat can be applied to dull painted surfaces that are beginning to get chalky and oxidized. Clear-coat will prevent the chalky finish from returning as well as bring back a rich shiny finish.; Q: What will Clear-Coat protect against? A: Clear-coat will protect your surfaces from Oxidation, Stains, Weathering, Salt Spray, UV Rays, Corrosion and Electrolysis.; Q: How long will the average application last? A: On boats that are kept on the trailer, or on a lift, it's not uncommon to get 3 to 4 years of protection, If you leave your boat in the slip all season long, from the water line down, it should last a couple of years or more. There are just too many variables such as water conditions and content, as well as severity of marine growth etc. But from the water line up, you can expect the same protection as any other boat. On things like RV's ECT., you can expect 3 to 4 years.; Q: What temperature is it safe to apply Clear-Coat? A: Clear-coat can be applied at any temperature but, you'll get a better finish at 50 degrees, than at 90 degrees.; Q: Can I apply Clear-Coat in the sun? A: Yes you can, but try to avoid direct sunlight if at all possible.; Q: What is "Cure Time"? A: Although Clear-coat dries to the touch in about 15 minutes, it takes as little as 2 or 3 hours, or as long as 24 hours depending on temperature and humidity.; Q: Do I need to remove the first Clear-coat application before I reapply years later? A: No, All you need to do is clean with Toon-brite, Aluminum or Fiberglass Cleaner, and apply the new coat.;

See more below

w

wholesalemarine

$90.49

Visit site

Review summary

AI-generated content

This product works great and is easy to use, however it is thin and may run after a few coats. It is a good quality single stage clear coat that may not be suitable for all applications. It may also chip after a few coats.

Pros

Easy to apply
Dries fast
Looks great
Inhibits algae growth

Cons

Very thin
Can run if not pre-applied
Chips after a month

Read original reviews

Description

Toon-Brite Protective Clear Coat for BoatsThis Toon-Brite Protective Clear Coat for Boats rejuvenates fading or oxidizing metal surfaces and provides a long-lasting barrier against the elements. It is a perfect clear coat option for aluminum, fiberglass, brass, copper, stainless, and other metal surfaces. This protective clear coat is designed from a corrosion-resistant non-conductive formula and will make future boat cleaning considerably easier. It will provide years of protection against oxidation, UV rays, weathering, stains, salt spray, and electrolysis. Easily apply a clear-coat with either a 3-4 inch foam brush or spray it using an HVLP type sprayer. Be sure to clean and dry the vessel surface prior to application.Features: Makes Future Cleaning Much Easier; Works On Aluminum, Fiberglass, Brass, Copper, Stainless and Most Metal Surfaces; Protects For Years Against Oxidations, UV Rays, Weathering, Stains, Salt Spray and Electrolysis; Restores and Rejuvenates Faded Or Oxidized Surfaces; Will Not Chip Or Peel; Corrosion Resistant; Great Color Restorer; Reduces Maintenance For Both Metal and Fiberglass; Non-Conductive; Sizes Available: Gallon Coverage: 800-1200 Sq Ft.; 12 oz. Spray Coverage: 120 Sq Ft; **Clear-coat is not an anti-fouling paint. How to Apply Toon-Brite Protective Clear CoatToon-Brite Protective Clear Coat can be applied to aluminum, fiberglass, stainless steel, brass, copper, and galvanized steel. All surfaces must be clean, dry, and free of all contaminants (especially waxes, grease, & oils) prior to application.Coverage: One quart will cover approx. 200-300 sq. ft.Surface Preparation Metal; Thoroughly clean surface with an acid wash.; Once the surface has been properly cleaned, test the surface for adhesion by applying Clear-Coat to a small area and observe for 5 minutes.; If the coating stays flat and flows out, the surface is adequately clean.; If beading occurs, re-clean.; Once surface is properly cleaned, apply 2 coats (or more) of Toon-Brite Clear Coat.; Fiberglass; Thoroughly clean the surface of oxidation, wax, and polish.; For heavy build up, use Toon-Brite Fiberglass Cleaner.; Apply Toon-Brite Clear Coat. Multiple coats may be necessary.; Follow up with fiberglass polish then wax.; Application Information Provide adequate ventilation when applying Clear Coat and remove all sources of ignition or spark.; To apply by hand, use a 3" or 4" foam applicator.; To apply by spray, Toon-Brite recommends using a HVLP paint gun. If needed, dilute with acetone.; Apply to the surface in long even strokes being careful not to let runs or sags develop.; Make sure to overlap each pass.; The surface temperature should be above 50F. Do not apply when humidity is above 85%.; For applications requiring multiple coats, the preceding coat should be dry to the touch.; Allow at least 8 - 24 hours to cure.; Clean up can be done with soap and water for hands. Use acetone or lacquer thinner for Clear-Coat clean up.Toon-brite Protective Clear-Coat FAQ'sQ: What type of surface will Clear-Coat work on? A: Clear-coat can be applied to Aluminum, Fiberglass, Copper, Brass, Stainless Steel, or any other surface you want to prevent from staining and discoloring.; Q: Can you see Clear-Coat once it's applied? A: Clear-coat is virtually invisible on all surfaces other than a high polished surface. On a high polish finish, Clear-coat when wiped can sometimes leave slight sheen. This will some what lessen with a second coat and it also tends to diminish with time.; Q: Will Clear-Coat work on painted surfaces? A: Yes, Clear-coat can be applied to dull painted surfaces that are beginning to get chalky and oxidized. Clear-coat will prevent the chalky finish from returning as well as bring back a rich shiny finish.; Q: What will Clear-Coat protect against? A: Clear-coat will protect your surfaces from Oxidation, Stains, Weathering, Salt Spray, UV Rays, Corrosion and Electrolysis.; Q: How long will the average application last? A: On boats that are kept on the trailer, or on a lift, it's not uncommon to get 3 to 4 years of protection, If you leave your boat in the slip all season long, from the water line down, it should last a couple of years or more. There are just too many variables such as water conditions and content, as well as severity of marine growth etc. But from the water line up, you can expect the same protection as any other boat. On things like RV's ECT., you can expect 3 to 4 years.; Q: What temperature is it safe to apply Clear-Coat? A: Clear-coat can be applied at any temperature but, you'll get a better finish at 50 degrees, than at 90 degrees.; Q: Can I apply Clear-Coat in the sun? A: Yes you can, but try to avoid direct sunlight if at all possible.; Q: What is "Cure Time"? A: Although Clear-coat dries to the touch in about 15 minutes, it takes as little as 2 or 3 hours, or as long as 24 hours depending on temperature and humidity.; Q: Do I need to remove the first Clear-coat application before I reapply years later? A: No, All you need to do is clean with Toon-brite, Aluminum or Fiberglass Cleaner, and apply the new coat.;

Specifications

Application Temperature	Above 50F
Compatibility	Aluminum, fiberglass, brass, copper, stainless, and other metal surfaces
Color	Clear
Form	Liquid
Effectiveness	Protects and restores metal surfaces from fading, oxidizing, staining, and corrosion.
Brand	Toon-Brite
Material Compatibility	Aluminum, fiberglass, brass, copper, stainless, and other metal surfaces
Finish	Clear coat
Chemical Resistant	Corrosion resistant
Formula	Corrosion-resistant non-conductive formula
Drying Time	Dry to the touch in about 15 minutes, cure time 8 - 24 hours depending on temperature and humidity.
Ease of Use	Easily apply with either a foam brush or a sprayer; makes future cleaning much easier.
Application Method	Either a 3-4 inch foam brush or spray it using an HVLP type sprayer
Coverage	Gallon Coverage: 800-1200 Sq Ft.; 12 oz. Spray Coverage: 120 Sq Ft.
Container Size	Gallon or 12 oz.
Features	Makes Future Cleaning Much Easier; Works On Aluminum, Fiberglass, Brass, Copper, Stainless and Most Metal Surfaces; Protects For Years Against Oxidations, UV Rays, Weathering, Stains, Salt Spray and Electrolysis; Restores and Rejuvenates Faded Or Oxidized Surfaces; Will Not Chip Or Peel; Corrosion Resistant; Great Color Restorer; Reduces Maintenance For Both Metal and Fiberglass; Non-Conductive
Durability	Provides years of protection against oxidation, UV rays, weathering, stains, salt spray, and electrolysis; will not chip or peel.
Application	Rejuvenates fading or oxidizing metal surfaces and provides a long-lasting barrier against the elements
Clean up method	Soap and water for hands, acetone or lacquer thinner for Clear-Coat